Battery And Charger; Technology; Suitable Charging Environments; Unsuitable Charging And Discharging Environments And Solutions - BH iLynx Manuel

Masquer les pouces Voir aussi pour iLynx:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
USER MANUAL
4.2.7 Throttle Function up to 6 km/h
SETTINGS: GARMIN - Connected
The pedal assistance system has a throttle function integrated into the display panel, limited to a
maximum speed of 6 km/h, compliant with standard
Add sensor
Select e-bike: Create
EN 15194.
Create sensor connection
sensor connection
To activate the system's throttle, the user must hold down the (+) button for 3 seconds
To cancel the throttle function, the user simply releases the (+) button
AUTOMATIC POWER OFF
4.2.8 System Error Indicator.
Select/add e-bike
Select created sensor
The pedal assistance system continuously checks its status.
This is an intelligent system that continuously checks the status of its different components.
The possible operating errors are described in the Troubleshooting section of this manual (if the
problem persists, disconnect the motor and contact a BH store).
If the problem cannot be fixed, contact a BH store to get the bicycle checked 
as soon as possible.
WARNING

5. BATTERY AND CHARGER

Garmin connected
Garmin connected

5.1 Technology

The battery that your BH bike is equipped with contains lithium-ion cells and is the most advanced technology
available in terms of energy density (energy stored per kilogram of weight and per cm3 of volume).
The current range of BH ATOM X batteries have different capacities, depending on the version purchased.
Lithium-ion batteries have the following characteristics:
A) Their performance decreases in extremely hot or cold environments.
B) One additional characteristic of BH EMOTION lithium-ion batteries is that they have no "memory effect", 
and are not affected by incomplete discharging.
C) They lose their charges naturally and gradually with use. The battery can be fully discharged (100%)
approximately 500 times, with maximum battery deterioration of 20%. In the case of partial discharges, only the
discharged part is counted. For example, if we charge the battery every time its charge level falls by 25%, we will
be able to charge it to 100% of its initial capacity 2,000 times.
In short, the guaranteed durability of the battery with maximum degradation of 20% is at least 20,000 km.
36
iLynx QUICK GUIDE
ATO MX Q UICK GU IDE
- 2
ATOMX
Pair e-bike display with
Garmin
3 sec
Cargar
Allows you to raise and lower assis-
tance mode leve
Remaining battery information.
ATOMX
Connection

5.2 Suitable Charging Environments

For safe and efficient charging, use the battery charger in a place that:
A) Is flat and stable (as it is on the bicycle). 
B) Is out of direct sunlight.
C) Is not accessible to children or pets.

5.3 Unsuitable Charging and Discharging Environments and Solutions

The hot and cold environments described below may lead to charging entering stand by or sleep mode without
fully charging the battery.
Winter discharging stand by mode or DUT (Discharge Under Temperature)
Battery discharging will enter stand by mode if the temperature is below -20 °C, stopping the pedal
assistance system from working and protecting the battery.
In such cases, stand by mode will automatically be disabled when the battery exceeds -20 °C.
Winter charging stand by mode or CUT (Charge Under Temperature)
Color
Battery charging will enter stand by mode if the temperature is below 0 °C. If charging starts and the
Assistance level
temperature falls below this level due to night cooling or other factors, charging will be stopped and
Acceleration level
stand by mode will be activated to protect the battery.
In such cases, stand by mode will automatically be disabled when the battery exceeds 0 °C.
Noise on televisions/radios/computers
Charging near to televisions, radios or similar devices may cause static, flickering images and other 
interference.
If this happens, recharge somewhere that is away from the television or radio (e.g. in another
room).

5.4 Battery Charging Process

Due to its advanced lithium-ion technology, there is no need to wait for the battery to completely discharge before
BATTERY
connecting it to the charger. Likewise, it is also not necessary to charge it to 100% before using it again. But bear
in mind that, in order to achieve a maximum operating range, a full charge is recommended.
Charging port
Charger
iLynx QUICK GUIDE
ATO M X Q UIC K GUID E
- 3
USER MANUAL
D) Is free from rain and moisture.
E) Is well ventilated and dry.
F) Has a temperature of between 15–25 °C.
UPLOAD
Downloading to bike
DOWNLOAD
Charger
Battery port
Charging port
EN
37

Publicité

Table des Matières
loading

Table des Matières