Before First Use - T-Fal EZ CLEAN INOX & DESIGN Mode D'emploi

T-FAL-NC00114408-02 24/09/12 14:52 Page9

Before first use

• The fryer can be completely dismantled.
Remove the lid. Remove the frying basket, the control unit
and the bowl. Remove the oil box by positioning the Oil
box control button on the Oil box position.
• Clean the lid, the bowl, the housing, the frying basket and
the Oil box with soap and water or put them in the
dishwasher.
Clean the control unit and the heating element with a
damp cloth.
Dry thoroughly.
• After cleaning, press on the red button under the fryer to
release any water in the bowl.
• Place the bowl and the heating element in position.
• Place the Oil box control button on the Oil box position
and insert the empty Oil box into the fryer.
• Completely unfold the basket handle; a "click" indicates
that it is correctly positioned.
Eng
Do not immerse
the control unit
with the heating
element in water.
Check that the red
button has gone
back to its original
position.
Make sure that
the control unit is
correctly
positioned
otherwise the
fryer cannot func-
tion.
5