Table des Matières
Publicité
3.8 Removing the power module
1.
Ensure actuator is disconnected from power supply.
2.
Remove all wiring from the terminals.
3.
Insert a flathead screwdriver in the slot as shown in the diagram.
4.
Depress the screwdriver and push it gently to the right to unlock the latch. Be careful not to break it off.
5.
While applying gentle pressure on the latch, pry the power module away from the actuator.
1
Fig. 42
IM-P344-01 CTLS Issue 7
AEL3 Electric Linear Actuators
3.3
3.1
3.2
33
Publicité
Table des Matières
