Led Functions - fisair DIPHUSAIR-MT2 Manuel D'installation Et De Maintenance

Humidificateurs isothermiques par injection de vapeur sèche
Table des Matières

Publicité

3.5 LED functions

AEL3E and AEL3R
LED
Both LEDs flash red
Top LED lights up red
Bottom LED lights up red
Top LED flashes green
Top LED lights up green
Bottom LED flashes green
Bottom LED lights up green
Both LEDs light up green
No LED lights up
Both LEDs flash red and green
AEL3X
LED
Both LEDs flash red
Top LED lights up red
Bottom LED lights up red
Top LED flashes green
Top LED lights up green
Bottom LED flashes green
Bottom LED lights up green
No LED lights up
Both LEDs flash red and green
LED info
Fig. 23
24
Description
Initialisation
Top limit stop or "OPEN" position reached
Bottom limit stop or "CLOSED" position reached
Actuator is running, moving to "OPEN" position
Actuator is stopped, last direction of travel "OPEN"
Actuator is running, moving to "CLOSED" position
Actuator is stopped, last direction of travel "CLOSED"
Wating time after switching on or after spring return
No power supply (terminal 21)
Actuator is in manual mode
Description
Initialisation
Top limit stop or "OPEN" position reached
Bottom limit stop or "CLOSED" position reached
Actuator is running, moving to "OPEN" position
Actuator is stopped, last direction of travel "OPEN"
Actuator is running, moving to "CLOSED" position
Actuator is stopped, last direction of travel "CLOSED"
No power supply (terminal 2a or 2b)
Actuator is in manual mode
Notice
This product should not be put into service until the machinery or
system into which the product is due to be fitted, or of which it is
intended to be a component, fulfils the relevant regulations and
standards. Responsibility lies with the plant engineer or the installer.
AEL3 Electric Linear Actuators
IM-P344-01 CTLS Issue 7

Publicité

Table des Matières
loading

Table des Matières