Sony HT-RT5 Manuel D'instructions page 37

• [Secure Link]
Activating Wireless
Transmission Between
Specific Devices
You can specify the wireless connection
to link the Bar Speaker to the subwoofer
and surround speakers using the Secure
Link function.
This function can help prevent
interference if you use multiple wireless
products or your neighbors use wireless
products.
1
Select [Wireless Sound Connection]
in [System Settings] (page 36).
2
Select [Secure Link].
3
Select [On].
4
Press SECURE LINK on the rear of
the subwoofer and the surround
speakers until the indicator turns
orange.
Proceed to the next step within a few
minutes.
5
Select [Start].
To return to the previous display,
select [Cancel].
6
After the message [Secure Link
setting is complete.] appears, press
.
If the message [Cannot set Secure
Link.] appears, follow the on-screen
instructions.
[Secure Link]
To cancel the Secure Link function
For the Bar Speaker
Select [Off] on Step 3 above.
For the subwoofer or the surround
speakers
Press and hold SECURE LINK on the rear of
the subwoofer or the surround speakers
for several seconds until the on/standby
indicator on the subwoofer or the
surround speakers turns green or flashes
in green.
Be sure to press SECURE LINK with the
point of a pen, etc.
37
GB