Leister SEAMTEK W-900 AT Mode D'emploi page 43

Réf.
Niveau Texte d'information
erreur
248 2 Error 248: Error Y-Axis. Busy during OUT-
State
250 2 Error 250: Open File in Write Recipes
251 2 Error 251: Write CSV Line in Write Recipes
252 2 Error 252: Close File in Write Recipes
253 2 Error 253: Can not finish X-/Y-Axis
IN-Movement Backup Source File.
254 2 Error 254: Can not finish X-/Y-Axis
IN-Movement
255 2 Error 255: Can not get System Time
256 2 Error 256: Can not get System Time
257 2 Error 257: LvWedge Current / Current too
low
258 2 Error 258: Can not open Backup Source File.
259 2 Error 259: Can not open Backup Destination
File.
260 2 Error 260: Can not read Backup Source File.
261 2 Error 261: Can not write Backup Destination
File.
262 2 Error 262: Can not close Backup Destination
File.
263 2 Error 263: Can not close Backup Source File. Machine Settings File on PLC (SPS) corrup-
264 2 Error 264: Can not open Recovery Source
File.
265 2 Error 265: Can not open Recovery Destina-
tion File.
266 2 Error 266: Can not read Recovery Source
File.
267 2 Error 267: Can not write Recovery
Destination File.
268 2 Error 268: Can not close Recovery
Destination File.
269 2 Error 269: Can not close Recovery Source
File.
Description
In Y_AxisOut()
Movement not possible, Y-Axis is already
operating
In RecipesWrite()
Error Machine Settings Open File
In RecipesWrite (), Error Write CSV Line
Machine Settings
In RecipesWrite (), Error Closing File
In InManState()
Check if parameter settings are correct or
X-Y-Axis is mechanically blocked
In InState()
Check if parameter settings are correct or X-
Y-Axis is mechanically blocked, check Aham
right enable setting
In PIcTime()
Can not get System Time
In PIcTime()
Can not set System Time
In LvWedge ()
Error occured in Current Measurement.
Check connection between Shunt and PLC
Machine Settings File on PLC (SPS) corrup-
ted. Do recover your Data from your Memory
Stick.
Missing Memory Stick.
Machine Settings File on PLC (SPS) corrup-
ted. Do recover your Data from your Memory.
Missing Memory Stick.
Missing Memory Stick.
ted. Do recover your Data from your Memory.
Machine Settings File on Memory Stick cor-
rupted. Do backup your Data from PLC (SPS)
to Memory Stick.
Machine Settings File on PLC (SPS) corrup-
ted.
Machine Settings File on Memory Stick cor-
rupted. Do backup your Data from PLC (SPS)
to Memory Stick.
Machine Settings File on PLC (SPS) corrup-
ted.
Machine Settings File on PLC (SPS) corrup-
ted.
Machine Settings File on Memory Stick cor-
rupted. Do backup your Data from PLC (SPS)
to Memory Stick.
43