FRIGOGLASS ICOOL 40/150 C Manuel D'utilisation page 22

ENG
FAULT
The ICM does not
cool.
The ICM makes
noise.
There is water on
the floor.
The lights don't
work.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:
•
Type of ICM
•
Serial number of the ICM
•
Brief description of the problem / observation
12. First aid
In case of accident, it is recommended:
ACCIDENT
Inhalation of refrigerant
Contact with eyes
Contact with skin
13. Disposal of the unit
For detailed information regarding the recycling of this product and its packaging, please contact your
local city office, your waste disposal service or the manufacturer through its service agent. By ensuring
this product and its packaging is disposed of properly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise incur by this product's
and packaging inappropriate disposal.
22
POSSIBLE REASONS
The door does not seal properly.
Leakage in the cooling system.
Intense metallic noise.
Inclined or not even floor.
The drainage hole for the condensate
water is blocked.
There is a leakage in the tray.
The lighting or the transformer are out of
order
IMMEDIATE ACTION
Take deep breaths of clean air. If irritation persists, contact a doctor.
Wash your eyes thoroughly with plenty of water for at least 15 minutes
and then consult a doctor.
Wash immediately with water.
HANDLING
Repair the doors for proper closing
(this type of repair should be
performed by an authorised
technician).
Repair the leakage (this type of repair
should be performed by an authorised
technician).
Call a Service technician.
Level the ICM properly by adjusting its
feet. Placing a spirit level on the top of
the ICM will assist you in levelling it.
Unblock the drainage hole.
Call a Service technician.
Call a Service technician.
and packaging