Sony VPL-FH500L Guide De Référence Rapide page 51

4
Align the connectors on the projector
with those on the projection lens then
insert the lens all the way in until it is
securely in place.
Connector section
Connector section
5
Tighten the four screws attached in
step 3.
6
Replace the front panel and fasten it
with the four screws.
When attaching the VPLL-Z4007
Adjust the focus. ("D VPLL-Z4007:
Adjusting the peripheral focus" (page 24))
A VPLL-FM22/ZM32/ZM42/ZM102/
Z4007/Z4011: Removing the
compensating glass
Before attaching the projection lens to the
projector, it is required to remove the
compensating glass from the lens mounting
part of the projector.
To remove the compensating glass
Turn the compensating glass
counterclockwise as illustrated then pull it
out towards you.
To attach the compensating glass
Insert the compensating glass with the arrow
mark on the glass aligned with the mark (F)
on the lens mounting part of the projector,
and turn the glass clockwise.
Attaching/Removing the Projection Lens
21
GB