Krups BW3140 Mode D'emploi page 2

CAUTION: the safety precautions are part of the appliance. Read them
carefully before using your new appliance for the first time. Keep them in a
place where you can find and refer to them later on.
On/off button - Display the temperature of the water in the
kettle.
On/off button - Display the temperature of the water in the
kettle.
Button to select the desired temperature (7 options: 100°
- 95° - 90° - 85° - 80° - 70° - 60°C). Saves the previously
selected temperature.
Button to keep warm (the cup flashes until the selected
temperature is reached). Keeps warm for 1 hour. By
default keeps warm to 60°C.
BEFORE USING FOR THE FIRST TIME
„ „
Remove all of the various packaging, stickers or accessories from both the inside
and outside of the kettle (do not forget to remove the transparent protective film from
the screen).
„ „
Adjust the length of the cord by winding it under the base. Wedge the cord into the
notch. (fig 1)
„ „
Throw away the water from the first two/three uses as it may contain dust. Rinse the
kettle and the filter separately.
1. TO OPEN THE LID.
„ „
Press the opening button on the lid. It lifts automatically. (fig. 2 and 3)
To close, press down firmly on the lid.
2. PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY
FROM WATER SPLASHES AND ANY SOURCES OF HEAT.
USE
1