Preventive Maintenance; Dismounting; Disposal - Nilfisk Booster 40-3 Mode D'emploi

7.

Preventive maintenance

7.0 Preventive maintenance
Depending on usage, maintenance should be undertaken by an authorized
service engineer at least once a year, to prevent defects and failure of
operation. Authorized engineers are persons who due to their skills and
experience have sufficient knowledge of the Booster Systems and are
confident with the state work safety regulations, accident preventing
regulations, lines and generally acknowledged technical regulations such as
DIN-norms and VDE-provisions. For your safety, this unit has been
manufactured according to all relevant regulations valid in the EU and
therefore it has been supplied with the CE-marking. For further information,
please refer to the service department.
8.

Dismounting

8.0 Dismounting
• Close the supply valve and depressurize the unit.
• Now remove the unit from wall.

8.1 Disposal

In case the unit should be disposed, it must be separated and sorted in e.g.
recyclable and non-recyclable parts.
The steel construction is easily separated and disposed and constitutes no
environmental risk - nor for the user.
Disposal must be made according to rules and regulations in force for
disposal of machines as well as all standards in connection with
environmental protection.
CAUTION
Disposal of electronic components and other remedies
must be handled as special disposal when disposed.
Alternatively, it can be disposed by a specialized disposal
company.
11