Description - Festo EduTrainer 8036772 Notice D'utilisation

8 Description

The module contains a 2-stage 1.5 kΩ resistor with a max. continuous power of 100 W.
Turning the knob clockwise increases the resistance of the R1.1 and R1.3 safety sockets from 0 Ω to 1500
ohms.
The L1, L2, L3, N safety sockets enable connection of a three-phase power supply system.
26
Warning - electric shock
The protective grounding terminal must be permanently connected to the protective
ground of the installation during operation!
Caution
The EduTrainer may only be operated in properly secured networks. Always use an
®
EduTrainer ® three-phase current supply, order no. 571812, or an equivalent device.
Warning - hot surface
The front plate and the housing may become hot during long periods of operation. Let
the device cool off.
8036771
© Festo Didactic