Bosch NIT8669SUC Manuel D'utilisation Et D'entretien page 21

Set the value on the control panel.
‚
4.
and the symbol will flash on the cooking zone
‚ D
display.
Press the WPS button on the router within the next
5.
2 minutes.
The cooktop is connected to the home network if the
D symbol no longer flashes but is lit up on the
cooking position display.
Note: If a connection cannot be established, the
"Connect manually"
ƒ
appliance in the home network manually or try
connecting automatically again.
The appliance automatically tries to connect to the
app, and •' and ƒ are displayed alternately.The
value flashes on the control panel.
‚
Start the app on the mobile device and follow the
6.
instructions for automatic network registration.
The registration procedure has been completed once
the value appears on the cooking position display.
‹
Manual Registration in the Home Network
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
Touch the kitchen timer key repeatedly until
3.
‚ are displayed alternately.
lights up in the cooking zone display.
‹
value appears. Register the
•'
Set the value on the control panel.
ƒ
4.
and the
ƒ D
display.
Use the "Home Connect" SSID and the "Home
5.
Connect" key to register the mobile device on the
cooktop network.
The cooktop is connected to the home network if the
symbol no longer flashes but lights up on the
D
cooking position display.
The appliance automatically tries to connect to the
app, and
•'
and
value flashes on the control panel.
‚
Start the app on the mobile device and follow the
6.
instructions for manual network registration.
The registration procedure has been completed once
the value appears on the cooking position display.
‹
symbol will flash on the cooking position
and are displayed alternately. The
ƒ
21