Assembly; Before First Use; For Use With The Nutri Disc - Breville Juice Fountain Duo Manuel D'instructions

Assembly

BEFORE FIRST USE

Before using your juicer for the first time,
remove and safely discard any packaging
material and promotional labels. Ensure the
power cord is unplugged. Wash the filter bowl
surround, Nutri Disc™, puree disc, puree insert,
juicer cover, food pusher, juice jug, juice jug
lid and pulp container in warm soapy water
with a soft cloth or nylon brush. Rinse and dry
thoroughly.

FOR USE WITH THE NUTRI DISC™

Place the motor base on a flat dry surface such
as a counter top. Ensure that the motor base is
turned OFF at the control panel then unplug
the cord.
1. Place the filter bowl surround on the top of
the motor base.
2. Align the arrows on the Nutri Disc™ with
the arrows on the motor drive coupling and
push down until it clicks into place. Ensure
the Nutri Disc™ is fitted securely inside the
filter bowl surround and onto the motor
base.
8
3. Place the juicer cover over the filter bowl
surround, positioning the juicer cover over
the stainless steel filter disc and lower into
position.
4. Raise the safety locking arm up and lock
into the two grooves on either side of the
juicer cover. The safety locking arm should
now be in a vertical position and locked into
place on top of the juicer cover.