Assembly - Breville Fountain Plus Manuel D'instructions

Assembly

Before using your Juice Fountain™ Plus for
the first time, remove and safely discard any
packaging materials and promotional stickers
and labels.
Ensure the appliance is turned OFF and the
power cord is unplugged.
Wash the filter bowl surround, filter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a
soft cloth. Rinse and dry thoroughly. The motor
base can be wiped with a damp cloth. Dry
thoroughly.
1. Place motor base on a flat, dry surface such
as a counter-top. Ensure that the motor base
is turned OFF and unplug the power cord.
2. Place filter bowl surround on top of the
motor base.
JE98XL_IB_G16.indd 9 JE98 8 XL_IB_G16.indd 9
3. Align the arrows at the base of the stainless
steel filter basket with the arrows on the
motor drive coupling and push down until
it clicks into place. Ensure the stainless steel
filter basket is fitted securely inside the filter
bowl surround and onto the motor base.
4. Place the juicer cover over the filter bowl
surround, positioning the feed chute over
the stainless steel filter basket and lower
into position.
9
29/0 /01/2 /2016 2:19 pm