Disassembly - Breville Fountain Plus Manuel D'instructions

4. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract the
maximum amount of juice, always push the
food pusher down slowly.
5. As fruit and vegetables are processed, juice
will flow into the juice jug and the separated
pulp will accumulate in the pulp container.
NOTE
• The pulp container can be emptied during
juicing by turning the Juice Fountain™ Plus
OFF at the control panel and then carefully
removing the pulp container. Replace empty
pulp container before continuing to juice.
• Do not allow the pulp container to overfill as
this may affect the operation of the appliance.
• To minimize cleaning, line the pulp container
with a produce bag to collect the pulp. Pulp
can then be used for other dishes, or as
compost for gardens or discard.
• To include the froth with your juice, simply
remove the lid of the juice jug when pouring
juice into the glass.
WARNING
Never use fingers to push food down the feed
chute or to clear the feed chute. Always use the
food pusher provided.
12
JE98XL_IB_G16.indd 12 JE98 8 XL_IB_G16.indd 12

Disassembly

1. Ensure the Juice Fountain™ Plus is turned
off by pushing the speed switch up or down
to the OFF position. Then unplug the
power cord.
2. Remove the pulp container by tilting the
motor base slightly to the right and unlatch
it from under the juicer cover.
3. Place both hands on either side of the safety
locking arm and pull back and lift over the
grooves on either side of the juicing cover.
Lower the safety locking arm down out of
position.
29/0 /01/2 /2016 2:19 pm