Breville Juice Fountain Duo Manuel D'instructions page 21

POSSIBLE PROBLEM
Juice leaks between the
rim of the Juicer Cover and
the filter bowl surround
Juice sprays out too
fast from juice spout
When using puree disc
the filter bowl surround
becomes full and clogs
the spout on the filter
bowl surround.
Juicer suddenly turns
off during juicing
Red light flashing
EASY SOLUTION
•
Try a slower juicing action by pushing the food pusher down slower.
Fruit and vegetables with a high water content (tomatoes and
watermelon) should be juiced on low speed or by using the puree disc.
•
Try a slower juicing action by pushing the food pusher down slower.
•
Try using fruits with more water content to help flush through the
contents. Additionally, try a slower juicing action by feeding one piece in
at a time and by pushing the food pusher down more slowly.
•
The juicer has been stressed by overloading or stalling. Juicer will
automatically activate the overload protection button and the unit will
turn itself off. When this happens it is recommended that the unit is
turned off and unplugged. Then press the Overload Protection Button
found on the bottom of the motor base. The safety device will then be
reset and the Breville juicer is ready for use again.
•
This may indicate that the motor has been stressed by Overheating with
excessive load. The Juicer is fitted with a self-resetting safety device
which safeguards against overheating on the motor with excessive
loads. If overheating occurs, the juicer will automatically activate the
overheating protection device and the motor will turn itself off. When the
overheating protection is activated, unplug the juicer from power outlet
for at least 15 minutes to allow the unit to cool. Then plug juicer into the
power outlet and use as normal.
•
The juicer will automatically stop operating if the motor is stalled. If
this occurs, the light surrounding the START | STOP button will flash
red. This is an electronic safety feature. Either too much food is being
processed at one time or the pieces are not small enough. Try trimming
food, cutting food into smaller pieces of even size and/or processing a
smaller amount per batch. To continue juicing, unplug the juicer from
power outlet, reset the Juicer by pressing the START | STOP button
to OFF, then clear the feed chute, plug the juicer in and finally turn the
appliance back on by pressing the START | STOP button to ON.
21