Breville Juice Fountain Duo Manuel D'instructions page 13

ELECTRONIC PROTECTION
The Breville juicer will automatically stop
operating if the motor is stalled. This is an
electronic safety feature. Either too much food
is being processed at one time or the pieces are
not small enough. Try trimming food, cutting
food into smaller pieces of even size
and/or processing a smaller amount per batch.
If this occurs, the light surrounding the
START | STOP button will flash red.
To continue juicing, turn the power OFF at the
control panel, clear the feed chute, finally turn
the appliance back on by pressing the START |
STOP button to ON.
OVERLOAD PROTECTION BUTTON
The Breville juicer is fitted with a safety
device which safeguards against overloading
with excessive loads. If this occurs, juicer
will automatically activate the OVERLOAD
PROTECTION button and the unit will turn
itself off.
If this occurs, remove the plug from the outlet
and allow the unit to cool. Then press the
OVERLOAD PROTECTION Button found
on the bottom of the motor base. The safety
device will then be reset and the Breville juicer
is ready for use again.
13