Prepare Installation Space; Countertop Requirements - Gaggenau VL 414 712 Notice De Montage

Prepare Installation Space

P r e p a r e I n s t a l l a t i o n S p a c e
T he kitchen unit must be heat-resistant to at least
200° F (90°C). The stability of the unit must be
maintained after producing the cut-out.
Produce the cut-out in the countertop for one or more
Vario appliances as shown in the installation sketch. The
angle between the cut surface and the countertop must
be 90°.

Countertop Requirements

The countertop must be level and horizontal. The stability
of the countertop must be maintained after the cut-out
has been made.
Prepare Installation Space
The cut edges at the sides must be flat to ensure a good
fit of the retaining springs on the appliance. In laminated
worktops, it may be necessary to fit strips at the sides of
the cut-out.
Remove shavings after cutting. Seal cut surfaces for
resistance to heat and so they are watertight.
Pay attention to a minimum gap of 3/8" (10 mm) from the
underside of the appliance to kitchen units.
en-us
9