Télécharger Imprimer la page

Hkoenig expro980 Manuel D'instructions page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Make steam : When the steam is preheated, turn steam knob to the Max position, at this time, the
Power indicator is always white, the hot water, single cup and double cup indicators are off, and
the steam indicator flashes white in the form of a breathing lamp, at this time the steam function is
in progress, turn the steam knob to the preheating position again, the steam indicator returns to
the normal white, the steam function is finished, select the steam knob to the "off" position, the
machine enters cooling state, at this time the steam indicator is extinguished. Until the machine is
cooled down completely, the machine enters the standby state.
Grinding coffee beans: Press power button, grinding indicator is lighted white, indicating unit
enters grinding beans preparation state, at this time attach pressurized filter holder into filter holder
bracket and push it forwards to grind coffee beans, during grinding the grinding indicator flashes
white; when grinder is not fit in place, grinding indicator flashes red, at this time coffee beans can
not be ground until grinder is fit in place.
Sleep mode : When the machine is not operating for 30 minutes in the standby state, it will
automatically enter the sleep state. At this time,
three indicators except the Power button
indicator are off, the Power button indicator flashes twice red, the buzzer rings two times. Pressing
any button in sleep mode activates the machine to re-enter the preheating state.
BEFORE THE FIRST USE
1. Check and ensure all accessories no broken.
2. Fill appropriate water into water tank.
3. Insert pressurized filter holder into filter holder snap position of the machine, turn it anticlockwise
to lock tightly.
4. Place a container on the drip plate, connect the machine into power source, steam knob shall be
in off position,press the Power button, the machine enters the preheating state, after finishing
preheating, the machine enters the standby state.
5. Press the Hot water button to dispense proper hot water, then press Hot water button to stop hot
water function, press Single or Double cup button to clean tubing system of machine.
6. Clean all detachable parts by warm water.

Publicité

loading