Hkoenig expro980 Manuel D'instructions page 8

CONTROL PANEL
steam indicator
Indicators
Each button has a light indicator around, and there is a triangular light indicator on the fixing ring of
steam knob.
Preheating ： Press the Power button once, the machine enters the preheating state, and the four
indicators flash white in the form of a breathing lamp. The machine need around 50S to preheat.
Standby ： After the machine is preheated, it enters the standby state. The four indicators and
steam indicator are illuminated constant white.
Make hot water ： In the standby state, press the Hot water button once to enter the hot water
function. At this time, the Power button indicator becomes constant white, the hot water indicator
flashes white in the form of a breathing lamp, Single cup and Double cup indicators extinguish.
Press the Hot water button again, the hot water function stops, and the machine enters the
standby state.
Brew single cup coffee ： In the standby state, press the Single cup button once to enter the
function of brewing a single cup of coffee. At this time, the Power button indicator is always white,
and the single cup indicator flashes white in the form of a breathing lamp, hot water indicator and
double cup indicator go out. Pressing the Single cup button once again or waiting for the ending of
single cup function, the machine enters the standby state.
Brew double cup coffee: In the standby state, press the Double cup button once to enter the
function of brewing double cup coffee. At this time, the Power button indicator is always white, the
double cup indicator light flashes white in the form of breathing lamp, hot water indicator and single
cup indicator go out. Pressing the Double cup button again or waiting for the ending of double cup
coffee function, and the machine enters the standby state.
Steam preheating:
In the standby state, turn the steam knob to the preheating position. At this time, the Power
indicator is always white, the hot water, single cup and double cup indicators are off, and the
steam indicator (triangle) flashes white. At this time, the steam function is preheating, and the
steam indicator is always white, and the steam function is preheated.