Hkoenig expro980 Manuel D'instructions page 11

Fine Crude
4. Make hot water: Press Hot water button, the Hot water button indicator flashes in the form of a
breathing light; hot water flows out from hot water pipe, after dispensing 200ml hot water, the
machine automatically stops and returns to standby mode. To stop the hot water function anytime,
press the Hot water button again.
5. Brew single cup of coffee: Attach 1- cup filter to the filter holder, load 13-15 grams of coffee
powder into filter using a tamper and press the coffee powder with a force of 10-15Kg, then align
the filter holder assembly with the filter holder bracket buckle position and turn it counterclockwise
into the filter holder bracket, put a coffee cup on the drip plate under the filter holder. Press the
Single cup button in the standby state, the Single cup button indicator flashes in the form of a
breathing light; the machine starts to brew coffee, and the pressure gauge will display pressure
parameters in brewing process, when the coffee is finished, the pressure gauge is reset, all
indicators on the panel are solid on, and machine restores to the standby mode.
6.Brew double cup of coffee: Attach 2- cup filter to the filter holder, load 20-22 grams of coffee
powder into filter using a tamper and press the coffee powder with a force of 10-15Kg, then align
the filter holder assembly with the filter holder bracket buckle position and turn it counterclockwise
into the filter holder bracket, put a coffee cup on the drip plate under the filter holder. Press the
Double cup button in the standby state, the Double cup button indicator flashes in the form of a
breathing light; the machine starts to brew coffee, and the pressure gauge will display pressure
parameters in brewing process, when the coffee is finished, the pressure gauge is reset, all
indicators on the panel are solid on, and machine restores to the standby mode.
Recommendation: To make a delicious hot espresso, we recommend that you preheat the
appliance before making the coffee, including the filter holder, filter and cup, so that the
coffee will not be affected by the cold appliance
5. 7.Produce steam to froth milk: In standby mode, turn steam knob from Off to Max position,
the machine starts making steam. the steam indicator flashes white in the form of a breathing light
during making steam. To stop steam function, turn the steam knob from Max to Off position and
steam indicator becomes constant on.
Note: it is recommended to allow the machine to have 1 minute rest after performing
steam function for continuous 10 minutes, so as to prevent the machine from
overheating.