Publicité
Les langues disponibles
Les langues disponibles
underneath the Vehicle; you may want to
use the jack Frame Handles.
6.
Move the Vehicle, if desired. Make sure
not to drive the Vehicle over the Easy lift
jack Frames or the Hydraulic Hoses.
NOTE:
Press and hold the D button for a few seconds
after the lifting frames have been fully lowered,
in order to return as much hydraulic fluid as
possible to the hydraulic fluid reservoir.
MAINTENANCE
WARNING!
Interrupt the power supply and relieve the
hydraulic pressure prior to maintenance and/
or cleaning.
CLEANING
Clean all parts regularly for optimum
functionality and service life.
•
Use suitable personal protective
equipment when working with the
hydraulic system.
•
Avoid skin contact with hydraulic fluid.
Follow the hydraulic fluid manufacturer's
safety instructions.
•
Contact a doctor immediately in the event
of skin contact or swallowing of hydraulic
fluid, or if hydraulic fluid gets into the
bloodstream.
STORAGE AND MOVING
•
If you need transport power unit with
hydraulic oil by car or truck, please replace
the filler plug on fluid reservoir by the seal
plug. The filler plug can not seal the fluid
in the reservoir,it causing the hydraulic
fluid slop out from the reseroir during
transportation. If you need transport the
power unit by logistics company, please
empty the fluid in the reservoir before you
send the power unit. Remember, before
you use the power unit, please remove
the seal plug and screw the filler plug
back. DO NOT use seal plug when you
using the power unit, it will damage the
fluid reservoir.
•
If the product is to be moved, release the
long hydraulic hoses from the power unit
and move the pump separately and the
lifting frames with hoses separately.
•
Store the product fully lowered when not
in use.
REPAIRS
•
Contact the retailer for technical
assistance or repairs. The warranty will be
invalidated if the product is modified in
any way, damaged as a result of an
accident, negligence or incorrect use, or if
it has been repaired by unauthorised
personnel.
CHECKS
•
Check all bolted joints regularly, and
tighten them if necessary.
•
Check the product for cracks in weld joints
as well as damaged, loose, worn or
missing parts each time before use. Do
not use the product until any worn or
damaged parts have been replaced.
•
Check that the Safety lock bars are in
good condition and working properly. Do
not use the product if the Safety lock bars
are damaged or worn.
•
Check the lifting blocks and replace them
if they are damaged or worn.
Monthly interval
Carry out the following maintenance every
month.
•
Lubricate all joints and check for wear. If
necessary, lubricate with white lithium
EN
41
Publicité
