Rupes LH16ES Traduction Des Instructions Originales page 9

SOUND
PRESSURE UNCERTAINTY
LEVEL [dB(A)]
[dB(A)]
L
pA
LH16ES 86
LH18ENS 88
LH22N 82
LH22EN 82
Use ear protection!
Displayed emission values are comparative and are to be
employed for a provisional assessment of the operator's
risk exposure during the work period. Appropriate evaluation
of work period must also include tool's idle and stop periods.
These emission values represent the tool's main applications.
If the tool is used for other applications, with other accessories,
or if it does not undergo regular maintenance, emission values
can significantly increase during operations.
MAINTENANCE
All maintenance operations are carried out with the power
supply disconnected.
At the end of each work session, or when required, remove any
dust from the body of the tool using a jet of compressed air,
paying particular attention to the motor ventilation slots.
No other maintenance operations must be undertaken by
the user.
Maintenance and cleaning of the inner parts, like brushes,
ball bearings, gears etc. or others, must be carried out only
by an authorized customer-service workshop also available
on the website hiip://www.rupes.it under Service section. Use
exclusively original RUPES.
DISPOSAL (WEEE DIRECTIVE)
For EC countries only: According to the European
Directive on Waste from electrical and electronic
equipment and its implementation in conformity
with national standards, exhausted electrical equipment
must be collected separately, in order to be recycled in an
environmentally friendly way. The product, when it reaches
the end of its life, must not be dispersed in the environment
or thrown away as household waste. It must be disposed at
authorized recycling centres (contact your local authorities to
know where to dispose of the product according to the law).
The correct disposal of the product contributes to the health
and preservation of the environment.
Illegal disposal of the product will entail penalties against the
offenders.
VIBRATION LEVEL[m/s
SOUND
(polishing)
POWER
LEVEL
On 3 AXIS
K L a
wA h
3 97 2,70
3 99 2,80
3 93 2,50
3 93 2,50
p
CONFORMITY DECLARATION
]
2
We declare on our responsibility that the represented tool is in
UNCERTAINTY
conformity with the Essential Requirements of Safety of the
K
following Directives:
1,30
2006/42/EU; 2014/35/EU; 2014/30/EU; 2011/65/EU.
1,30
The tests have been carried out in accordance with the
1,20
European Harmonised Standar:
1,20
EN 60745-1:2009 + A11:2010;
EN 60745-2-3:2011 + A2:2013 + A11:2014 + A12:2014
+ A13:2015;
EN 55014-1:2006 + A1:2009 + A2:2011;
EN 55014-2:1997 + A1: 2001 + A2:2008;
EN 61000-3-2:2006 + A1: 2009 + A2:2009;
EN 61000-3-3:2013;
EN 62233:2008.
THE PRESIDENT
Technical file at:
RUPES SpA
Via Marconi, 3A - Loc. Vermezzo 20071
Vermezzo con Zelo (MI) - Italy
S.p.A
G. Valentini
Vermezzo con Zelo (MI), 21/04/2016
9