Whittier Wood Furniture 582Wd Instructions D'assemblage page 7

U
Z3
Fig. 6
6. Attach the Drawer Slides (Drawer Side Left) (Z4) and (Drawer Side Right) (Z3) to the drawers.
Place the front edge flush with the drawer side and the wheels to the rear. Attach the slides with
#6 x 5/8" Undercut (Type 17) Screws (U). See Figure 6.
Fig. 7
7. Attach the Small Drawer Face (E) to the Small Drawer False Front (C). Insert the #8 x 1-3/8"
Machine Screw (ZF) through the center hole in the Drawer False Front and LOOSELY fasten the
Knob (Wc). See Figure 7. DO NOT insert the LoProfile Screws (Xd) yet.
Repeat the above steps for the Large Drawers and the Large Drawer Faces (F).
C
ZF
Wc
E
Page 7 — 582Wd — 03/14
Z4
U