Dc Power Cable (With Fuses); Fuse; Mounting Bracket; X 16 Mm Self-Tapping Screw - Kenwood NX-3000 Série Guide De L'utilisateur

4 Mount the microphone hanger in a location where it will be within easy reach of
the user.
The microphone and microphone cable should be mounted in a place where they will
●
not interfere with the safe operation of the vehicle.
CAUTION
When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the same rating.
Never replace a fuse with one that is rated with a higher capacity.
CAUTION
.
HOT SURFACE

Flat washer

Spring washer

M4 x 6 mm
hex-headed
screw with
washer
RF antenna
connector
Power input connector
DC power cable
Do not touch the metal surface of the transceiver while it is in use.
Do not mount the transceiver such that the chassis can come in
contact with skin.
High temperatures may burn your skin.
5 x 16 mm
Self-tapping
screw
External
speaker jack
Black (–) cable
Red (+) cable
Optional microphone
GPS antenna connector for KRA-40
(NX-3720G/ NX-3820G only)

Fuse

Mounting bracket

12 V vehicle
battery
7