Bartscher 70 Serie Manuel D'installation page 28

The following instructions for starting up and functioning refer to gas and mixed appliances
belonging to category I
Butane (G30) of 28/30mbar, for propane (G31) of 30/37 mbar, for Methane (Natural Gas) (G20-
G25) of 20/25 mbar and for town gases (G110 – G120) of 8 mbar. The data plate (fig. 6 – pag. 4)
with all the information to refer to regarding the appliance, is situated inside the right or left side of
the control panel, depending on the model.
The appliances have been checked in accordance with the European norms below.
2006/95/CE - Low Tension (LVD)
CEE 2004/108 - Electromagnetic Compatibility (EMC)
90/396/EEC - Gas Appliances
98/37/EC - Appliance to the directives
And the particular reference norms.
Declaration of compliance
The manufacturer declares that the appliances of their production are compliant with the above
mentioned EEC norms and requires that installation be done observing the norms in force,
particularly regarding the system for letting out fumes and air exchange.
Gas Appliances
Sturdy structure in steel placed on four feet which make it possible to regulate the height in the
version with cabinet.
The outer finishing is stainless steel with Chrome-Nickel 18-10. It has a safety gas cock, enabling
regulation of the output from maximum to minimum, safety is ensured by a thermocouple which is
kept active by the flame of the pilot burner.
The tub is made entirely in stainless steel, resistant to salted water and to starch. The chamber is
heated by means of a stainless steel tubular burner, suitable for proper functioning at the high
temperatures to which it is exposed.
Electric Appliance
Sturdy structure in steel placed on four feet which make it possible to regulate the height in the
version with cabinet. The outer finishing is stainless steel with Chrome-Nickel 18-10.
Each tub is provided with a selector, which makes it possible to regulate the power from maximum
to minimum in four positions; safety is ensured by a manually activated thermostat.
The tub is made entirely in stainless steel, resistant to salted water and starch.
The heating is done by means of elements protected with a sheath, resistant to salted water.
TECHNICAL FEATURES
, II , II , II
3B/P 2H3+ 2H3B/P
DESCRIPTION OF APPLIANCES
, III , III
2L3B/P 1ab2H3B/P
Pag. 10
with a power pressure for
1a2H3B/P