Switching On The Sauna Light; Sauna Light During Operation; Sauna Light For Cleaning; Blower - Overrun Time - infra world Saunacontrol T3 Notice De Montage Et D'utilisation

6.3.

Switching on the sauna light

6.3.1. Sauna light during operation

The sauna light is switched ON or OFF by pressing the

6.3.2. Sauna light for cleaning

Switch on with the
The light can now be switched ON or OFF with the
6.4.

Blower - overrun time

This display is only shown with active blower function = YES (see item 5.3).
Switch on with the
Push the button several times until „blower" is shown. Use the
Each time the button is pressed, the operating time increases by 15 minutes. A maximum of 60 minutes is
possible.
Each time the button is pressed, the operating time decreases by 15 minutes (if the operating time is less
than 15 minutes, the overrun time of the blower is terminated). The controls switch off automatically after the set
time has expired.
00:32:15
blower
ON
By pressing the or
6.5.

Switching off

When the set time is complete, the cabin switches off automatically.
The evaporator mode starts a drying period of 30 minutes at 80 °C (display shows "dry"). The ventilator is
switched on in the drying phase (with active ventilator function = yes).
Press the button to switch off during operation or drying.
Switch off with evaporator sauna during operation:
1 x button... Start drying mode (30 min, 80 °C)
2 x button... Return to start screen
3 x button... Control is switched off (standby)
Switching off with other operating modes:
1 x button... Return to start screen
2 x button... Control is switched off (standby)
button (the start screen appears).
button (the start screen appears).
Remaining time (max. 60 minutes)
button, the blower program is also terminated.
button.
button.
button to switch on the blower.
EN
29