Operation; Switching On The Sauna; Starting The Sauna; Starting The Sauna With Activated Child Lock - infra world Saunacontrol T3 Notice De Montage Et D'utilisation

6.1.

Switching on the sauna

6.1.1. Starting the sauna

After pressing the button, the start screen appears on the display.

6.1.2. Starting the sauna with activated child lock

If the display shows „L O C K E D" when the sauna is switched on
The child lock function can be deactivated by holding down the
button. The child lock is automatically enabled again when the sauna is switched off.
Saunacontrol
T3
Infraworld V1.0/101
Select the operating mode by pressing the
- 1x for sauna
- 2x for evaporator
- 3x for infrared surface heating
- 4x for infrared radiator
- 5x for blower [only active with blower function = YES] (see item 5.3)
After the countdown time has expired (counting down from 5 to 0 on the top right-hand side of the display), the
selected operating mode is enabled. The sauna starts with the last values set.
Infrared radiators can be connected via the rotary buttons in any operating mode.
To access the programming mode, hold down the
(see item 8. Preselection, operating time).
Displays

Operation:

infrared 01:25:30
50
temperature:
49
relative hum.:
60
temperature IR:
Settings:
-settings-
65
temperature:
53
relative hum.:
80
temperature IR:
6. OPERATION
Start screen
button several times:
Sauna mode selected with current operating time
Black progress bar with operating time (actual value, reference value)
Current sauna temperature
°C
Red progress bar (actual value, reference value)
%
Current rel. humidity Blue bar chart (actual value, reference value)
°C
Current surface heating temperature Green bar chart (actual value,
reference value)
°C
Reference sauna temperature
%
Reference sauna humidity
°C
Reference sauna surface heating temperature
, the child lock is active.
and buttons and briefly pressing the
button for 2 sec. (before the countdown time reaches 0)
EN
27