Zero" Or "Tare" Function; Auto Shut Off / Manual Shut Off / Warning Indicators - Giropes Baxtran GREENKS Mode D'emploi

9. "ZERO" OR "TARE" FUNCTION

To weight different loads consecutively without removing loads from
the scale. Put first on the scale, get weight reading. Press
ton to reset the LCD reading to "0" before adding next load. You can
repeat this operation.
— Condition 1: "TARE" funciton whem total sum og all loads on
scale >0g.
LCD will show ------ or 0g each time
processing, please wait for a moment. When 0g and icon T on lower left
cornerof LCD show ip together, it means tare function is active. Max.
Capacity is reduced by total weight of all loads.
10. AUTO SHUT OFF
Auto shut-off occurs if no operation or shows
the same weight reading for 300 seconds.
but-
— Condition 2: "ZERO" function When total sum of all loads on
scale <0g
is pressed. ----- means
LCD display will show ---- or 0g each time
means processing, please wait for a moment.
When LCD shows "Og", it menas "ZERO" function is active. Max capa-
city remains unchanged.
MANUAL SHUT OFF
To maximize battery life, please press
button for 3 seconds to turn off scale after use.
USER MANUAL GREENKS
is pressed. "-----"
WARNING INDICATORS
1. Replace new battery
2. Scale overload. Remove item to avoid da-
mage. Max. weight capacity is indicated on
the scale.
EN
11