Important Information - Wohler Rm 400 Instructions De Service

General information
1.8

Important information

WARNING!
Protective equipment:
Guide the cable only with a suitable guide glove.
Wear protective glasses depending on the application.
Wear safety shoes with rubber soles (insulation) during cleaning work.
ATTENTION!
Work area:
Place the drain cleaning machine on a straight and non-slip surface.
Never place the mains cable in the area of the pipe cleaning cable.
Always work with the guide hose.
WARNING!
Before switching the drain cleaner on.
Avoid unintentional rotation of the cable. Put the control switch in OFF-Position before
connecting the drain cleaner to the power supply.
Danger of jamming: Do not form a large working arc with the cable. The cable can over-
turn. Make sure that the distance between the Wöhler RM 400 and the pipe entrance is
max. 50 cm. Do not pull out the cable any more.
Risk of injury: The cable can jump out of the tube under tension.
NOTE!
Select the appropriate auger for the blockage and the pipe diameter in order to prevent
the auger from hooking and thus the cable from being thrown out of the pipe. Use a
camera system to identify the cause of the blockage and select the appropriate tool.
NOTE!
Mechanical pipe cleaning should always be carried out from above, towards the block-
age.
WARNING!
Maintenance:
Disconnect the electric power before making any adjustment, accessory assembly and
maintenance. Keep the electric part of the machine from getting wet. Do not immerse
the appliance in water when cleaning it.
26