Ergon Performance Comfort Serie Mode D'emploi page 15

28
5.
Important:
Recommended torque: 5 Nm
The grips should not turn on the bar!
Re-check the torque setting following
the first ride / 50 km of riding. Check
periodically to ensure that the screws
are not loosening.
6.
Important:
Check List!
ERGON BIKE ERGONOMICS
5. Tighten to 5 Nm torque using a 4 mm torque wrench.
Re-check the torque setting following the first ride / 50 km
of riding. Check periodically to ensure that the screws are
not loosening.
Please ensure that you have the correct grips mounted left
6.
and right (1). The end of the clamp should be level with the
end of the bar (2.2). Insert the end plugs as shown.
29