Ergon Performance Comfort Serie Mode D'emploi page 10

ERGON BIKE ERGONOMICS 19
Installation Instructions
Ergon GP1 Grips
Attention: Please read these instructions carefully. Only correctly
installed Ergon grips allow for optimum function. Ergon GP1 grips
require a handlebar with 22.2 mm diameter in the grip area and
uninterrupted bar space of:
- 132 mm each side for standard shifters
- 132 mm left and 96,5 mm right for Rohloff /Nexus
® ®
- 94,5 mm each side for GripShift
®
Only handlebars that have been approved by their manufacturer
for use with clamp on grips should be used and can withstand
the required clamping force. Carbon bar use permitted. Thin wall
handlebars (some carbon and aluminium models) can be used.
Please ensure prior to fitting that the bar is suitably cleaned using
alcohol or other degreasers.