CARE Sporter Mode D'emploi page 11

Speed KM/H(M/H): showing your current speed. Range: 0.0～99.9 KM/H(M/H).
RPM: showing the current rotate per minute. Range : 0～999.
TIME: the accumulative exercise time, range : 0:00～99M59S.
the preset time range is 5:00～99M00S. The computer will start to count down from preset time to 0:00
with average time for each resistance level. When it reaches to zero, the program will stop and computer
alarm. If you do not preset the time, it will run with one minute decrement each resistance level.
DIST: the exercise accumulative distance. Range : 0.0～99.9～999KM(MILE) the preset distance
range :1.0～99.0～999. When the distance reaches 0, the program will stop and the computer will alarm.
CALORIE: he exercise accumulative calories burnt. Range : 0.0～99.9～999 the preset calories
range :10.0～90.0～990. When the calorie reaches 0, the program will stop and the computer will alarm.
PULSE: showing the exercise heart rate value.
Range: 60～240BPM(beat per minute)
RESISTANCE LEVEL: showing level. Range:1～16
WATT: show the exercise watt,the interval should be 10,between 30-350
1. Plug in one end of the adaptor to the AC electrical source and connect the other end to the bike. The
computer will beep and enter into initial mode.
2. Program select and value setting
● Manual Program and Preset Program P1～P10
A. Press UP, DOWN button to select the program that you like.
B. Press ENTER button to confirm the selected program and enter time setting window.
C. The time will flash, and then press UP, DOWN button to set up your desired time. Press ENTER to
confirm the value.
D. The distance will flash, and then press UP, DOWN button to set up the desired distance value. Press
ENTER to confirm the value.
E. The calories will flash, and then press UP, DOWN to set up the desired calories to be consumed. Press
ENTER to confirm the value.
F. Press START/ STOP to begin exercise.
● User Profile Programs: CUSTOM1～CUSTOM5(P11-P15)
A. Press UP, DOWN button to select the user.
B. Press ENTER to confirm your choice, and enter into time setting window.
C. The time display will flash, and then press UP, DOWN button to set up the desired time to do the
exercise. Press ENTER to confirm the value.
D. The distance will flash, and then press UP, DOWN button to set up the desired distance value. Press
ENTER to confirm the value.
E. The calories will flash, and then press UP, DOWN button to set up the desired calories to be consumed.
Press ENTER to confirm the value.