hestan KRP Serie Mode D'emploi page 22

GETTING TO KNOW YOUR REFRIGERATOR
SPECIAL SETTINGS AND FUNCTIONS (continued)
FRESH ZONE OPTIONS
EN
How to set the Fridge function
How to set the Fresh function
How to revert to the Freezer function
DEFAULT SETTINGS
How to reset default settings
ATTENTION: If the default settings are restored, the
default mode of the Fresh Zone compartment is freezer
mode. If it was previously being used in refrigerator
or Fresh mode be sure to set it back to your desired
setting.
DATE SETTINGS
How to set the date
How to activate the date
How to deactivate the date
How to set the time
20
©2018 Hestan Commercial Corporation
Select the Menu button
to select Fresh Zone.
The freezer compartment can, if required, be converted to refrigeration
or Fresh operating mode.
This offers the possibility to reset default factory settings and cancels
any previous changes.
The display will show the date in the format dd:mm:yy (day:month:year),
the day will blink. Use the Up/Down buttons
con rm rm with Enter
con rmed the date will be set.
Using this function it is possible to deactivate/activate the date being
shown on the display.
The display shows the hours and minutes in the format hh:mm and with
hh: blinking. Use the Up/Down buttons
con rm by pressing Enter
Once the minutes are con rmed, the time will be set.
(continued)
and use the Up/Down button
to modify the setting,
to go on to the next setting; once the year is
to modify the setting and then
to go on to the next setting.