hestan KRP Serie Mode D'emploi page 21

GETTING TO KNOW YOUR REFRIGERATOR
SPECIAL SETTINGS AND FUNCTIONS
WATER FILTER
How to check the status of the
RESET FILTER
How to set the ltered water
meter to zero
BYPASS FILTER
How to activate lter Bypass
MANUAL CLEAN WATER FILTER
How to manually clean the lter
Correctly position the ice tray or another suitable
container under the IceMaker to collect water,
then close the drawer. At the end of the operation,
wash the tray.
The View Status function permits visualizing the time left before the
lter needs to be replaced.
lter
The Reset Filter function sets to zero the time left before the
lter needs to be replaced. It is necessary to set the meter to zero
each time the cartridge is replaced.
This function is to be activated when it is not necessary to lter
the water because excellent quality water is already available from
the home water system.
If ice production has been disabled or unused for a long period it is -
recommended to perform a Manual Clean function to ush out
water which has salt in the system during this period. Repeat the
operation until the water is clean.
Before proceeding it is important to turn off the ice maker by
pressing the Ice
(continued)
button.
©2018 Hestan Commercial Corporation
(continued)
EN
19