Specifications; Packaging Transport And Storage; Operating Safety Instructions - Tecno-gaz Unika Mode D'emploi

MECHANIC:
LENGTH
HEIGHT
WIDTH
WEIGHT
MATERIAL
MAX TEMPERATURE
Unika is contained in a plastic bag, then placed inside a corrugated board box and stabilised by means of expanded
polystyrene.
It must be transported in compliance with the regulations on fragile goods.
No specific problems emerge during its storage; up to three boxes can be piled up and no expiration date is
envisaged.
The original package must be stored during the whole life of the warranty, since it is the only container that can
prevent any damage during transport.
If the instructions above are not complied with, the warranty is void.
The packaging components must be disposed of pursuant to the regulations in force in the country where the machine
is used.
Operating the machine does call for means of personal protection; nevertheless, it must be borne in mind that
the machine is equipped with an electric system and that it produces heat during operation.
To avoid injuries or damage, the instructions included in the present manual must be strictly complied with.
DUKF151_REV5.doc

SPECIFICATIONS

ELECTRICAL:
200 mm GROUNDED SINGLE-PHASE POWER SUPPLY
300 mm FREQUENCY
400 mm FUSE CURRENT
13 Kg INPUT POWER
INOX 304 PROTECTION TYPE
50 °C CLASS

PACKAGING TRANSPORT AND STORAGE

OPERATING SAFETY INSTRUCTIONS

PAR.1
PAR.2
PAR.3
13
230 V
50 Hz
6.3 A
1.2 KW
PE
1