Iwata WORKSHOP IWC28S Mode D'emploi page 4

Quiet Oil-Free Air Compressor
AVERTISSEMENT
Dust or dust-like particulates caused by power-sanding,
sawing, grinding, drilling or any other construction-like
activities can contain contaminants that are harmful to
breathe.
Always use your air compressor in a well-ventilated
and clean area.
Never breathe the air that comes directly out of the
air compressor or air hose. This air is not suitable for
breathing.
Always wear approved safety equipment. When
performing dust-creating activities, securely wear
properly-fit face masks or respirators.
If you feel ill from breathing while operating your air
compressor, stop and seek medical attention
immediately.
AVERTISSEMENT
Air compressor surfaces become hot during operation.
DO NOT touch hot surfaces, because they can cause
severe burns.
Do not touch the air compressor's cylinder head. During
operation, the cooling fins of the cylinder head and
delivery pipe become hot.
Allow the air compressor to cool before touching it.
DO NOT place a storage cover on the unit during
operation. Only place a cover on the air compressor
after it has thoroughly cooled down.
4
Customer Support 503-253-7308 M-F, 8am-4:30pm PST | iwata.support@iwata-medea.com | www.iwata-airbrush.com/blog/contact-us
Flying objects can cause injury to the eyes, head and
other parts of the body.
Air-powered equipment and power tools are capable
of propelling items (metal chips, fasteners and
particulates) at high speed into the air and could result
in injury.
Always wear approved head and eye protection.
Never point the air stream at any part of your body, or at
another person or animal.
When operating the air compressor, make sure all other
people and animals maintain a safe distance.
Do not move the air compressor when the air tank is
under pressure.
Never use the air hoses to pull or move the air
compressor.
Keep the air compressor on a flat surface.
Exercise caution when using pressurized air.
To prevent injury and for your general safety, only
use high-pressure hoses, fittings and couplings
designed for use with air compressors.
Inspect all hoses, fittings and couplings for leaks
and wear. When leaks and wear are detected, stop
use and replace those items immediately. Do not
repair.
Never leave pressurized air in the air tank when
performing maintenance.
Never leave the air compressor unattended with the
power supply in use and the air hose connected.
www.iwata-airbrush.com
AVERTISSEMENT
AVERTISSEMENT