Important Safety Instructions - Iwata WORKSHOP IWC28S Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS

Safety messages & Signal Words:
Indicates an immediate hazardous situation which, if
not avoided, will result in death or serious injury to
the operator or to bystanders.
Indicates a potentially hazardous situation which, if
AVERTISSEMENT
not avoided, could result in death or serious injury to
the operator or to bystanders.
Indicates a potentially hazardous situation which, if
ATTENTION
not avoided, may result in moderate or minor injury to
the operator or to bystanders.
Indicates a situation which, if not avoided, may result
in damage to product components or other property.
Customer Support 503-253-7308 M-F, 8am-4:30pm PST | iwata.support@iwata-medea.com | www.iwata-airbrush.com/blog/contact-us
AVIS
www.iwata-airbrush.com
Moving parts can cause severe trauma.
Keep hands and feet away from rotating parts, tie up long
hair, remove jewelry, and DO NOT wear loose clothing.
There is a danger of electric shock.
Use only undamaged electrical cords.
DO NOT touch bare wires or receptacles.
DO NOT operate air compressor in wet weather or in
wet conditions.
DO NOT touch air compressor or cords if hands or feet
are wet.
Ensure that all cords are free of damage before
connecting to the power supply.
Ensure that you have a sufficient electrical supply for
supporting the requirements of the motor.
Improper installation of the grounding plug is able
to result in a risk of electrical shock. When repair or
replacement of the cord or plug is required, do not
connect the grounding wires to either flat terminal. The
wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
This product must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the
electrical current.
This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded in accordance with local codes and
ordinances.
This product is for use on a nominal 120-V circuit and
has a grounding plug similar to the plug illustrated in
sketch A. Only connect the product to an outlet having
the same configuration as the plug.
Do not use an adapter with this product.
Quiet Oil-Free Air Compressor
3