Settings - CAPITAL SPORTS Timeter 2.0 4 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SETTINGS

Set individual count-up time or countdown time
Press the up arrow for a count-up time, „down" for a countdown time. The
timer (00:00 or 99:59) is displayed.
Press EDIT to set the timer. When the digits are flashing, use the number
buttons on the remote control or the arrow buttons (right/left). Press EDIT
again to save the change or press EXIT to cancel editing the timer without
saving.
Press EDIT again, followed by entering a number from 1-9 or F7, F8, F9,
F10 or F11 (free memory) to assign your setting to a DeepL access key. A
beep indicates that the storage process was successful.
Press ENTER to trigger a 10-second countdown (if activated), which
counts up from 00:00 to 10:00 seconds. Afterwards, the count-up/
countdown time is counted at your set count-up/countdown time.
Press ENTER to start/stop/continue counting or RESET to cancel.
Recall the timer by pressing the selected DeepL access key.
Setting Individual Interval
Press INTERVAL on the remote control
Press EDIT. The timer displays the number of laps. Use the number
buttons on the remote control or the arrow buttons (right/left) to change
the number as desired.
EN
15

Publicité

Table des Matières
loading

Produits Connexes pour CAPITAL SPORTS Timeter 2.0 4

Ce manuel est également adapté pour:

10028193

Table des Matières