Ec Declaration Of Conformity - Burkert PTB 03 ATEX 5014 X Instructions De Service

EC DECLARATION OF CONFORMITY

As manufacturer, Bürkert Werke GmbH & Co. KG herewith declares that these
products comply with the requirements of the Directives of the Committee for the
Harmonization of the Legal Regulations of Member States concerning
• electrical equipment with rated voltages of 50-1000 V AC respectively 75-
1500 V DC (Low Voltage Directive 73/23/EC),
• electromagnetic compatibility (89/336/EC)
• equipment and protective systems intended for use in potentially explosive
atmospheres (ATEX, 94/9/EU).
The following standards were consulted with respect to the compliance with the
Low Voltage Directive:
EN 50178 Power current equipment with electronic devices
EN 60730-1 Automatic electrical controlling and regulating equipment
EN 60664-1 Insulation coordinates for electrical equipment in low voltage
installations
EN 60529 Methods of protection through the enclosure (IP code)
EN 60204-1 Safety of machines
VDE 0580 Electromagnetic devices, general requirements
The following standards were consulted for assessing the devices with respect to
electromagnetic compatibility:
EN 61000-6-2 Basic specification interference transmission;
Part 2: Industry
EN 61000-6-2 Basic specification interference immunity;
Part 2: Industry
For the assessment of the products according to the ATEX directive one or se-
veral of the following standards were used. The used standards are listed in the
EC type-examination certificate.
EN 60079-0 Electrical apparatus for explosive gas atmospheres -
Part 0: General requirements
This standard will replace the standard EN 50014
EN 60079-1 Electrical apparatus for explosive gas atmospheres -
Part 1: Flameproof enclosures "d"
This standard will replace the standard EN 50018
6 - 03 ATEX5014 X