Festool CTM 26 E Notice D'utilisation page 18

English
Mobile dust extractors
Container capacity
Dimensions L x W x H
Weight
5 Intended use
Mobile dust extractor suitable for
– Extracting dust up to 0,1 mg/m³ according
to dust class 'M', including wood and paint
dust,
– Extracting water,
– Increased loads during commercial use,
according to IEC/EN 60335-2-69.
The user is liable for improper or non-in­
tended use.
6 Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accidents
► Observe the specifications on the ma­
chine's name plate.
► Observe country-specific regulations.
6.1 Initial operation
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Remove the accessories from the dust con­
tainer [2-3] and the packaging!
18
CTM 26 E
CTM 26 E AC
CTM 36 E
CTM 36 E AC
CTM 48 E
CTM 48 E AC
CTM 26 E
CTM 26 E AC
CTM 36 E
CTM 36 E AC
CTM 48 E
CTM 48 E AC
CTM 26 E
CTM 26 E AC
CTM 36 E
CTM 36 E AC
CTM 48 E
CTM 48 E AC
► Insert a filter or disposal bag in the dirt trap
(see chapter 7.7and 7.8).
► Replace the top section [2-1] and close the
locking clips [2-2].
► Attach the cable holder to the rear of the
mobile dust extractor (see Fig. [3]).
► Connect the suction hose to the machine.
6.2 Switching on/off
► Insert the mains plug into an earthed sock­
et.
WARNING
Risk of injury from tools starting up unex­
pectedly
► Before setting the switch to the "AUTO" or
"MAN" position, make sure that the con­
nected tool is switched off.
The switch [1-11] serves as an on/off switch.
"0" switch position
Appliance socket [1-4] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket [1-4] is connected to the pow­
er, the mobile dust extractor starts.
26 l
36 l
48 l
630 x 365 x 540 mm
630 x 365 x 596 mm
740 x 406 x 1005 mm
13.9 kg
14.7 kg
14.4 kg
15.2 kg
18.8 kg
19.6 kg