Deleting Data Stored In Memory; Measurement With The Desired Systolic Pressure; User Selection - A&D Medical Life Source UA-767FAM Manuel D'instructions

4. Deleting Data Stored in Memory

In standby, press both the
mark, battery indicator and user mark will appear. When
you would like to delete the memory data of the currently
displayed user, press and hold both the
until the illuminated

5. Measurement with the Desired Systolic Pressure

Refer to page 15 for measurement with the desired systolic pressure.

6. User Selection

Press the SET button before measuring blood pressure to select a user from 1
to 4.
In standby, press the SET button.
Each time the SET button is pressed, the user changes.
Press the START button to set to the currently displayed
user.
and buttons. The
mark starts blinking.
English 8
and buttons