Memory Recall - A&D Medical UB-510 Mode D'emploi

3. Memory Recall

This blood pressure monitor memorizes measurement data (Systolic, Diastolic and Pulse value)
automatically after each measurement is complete.
- Total No. of memory: 30 sets
- When the memory reaches maximum capacity, it deletes the oldest memory data.
- All the memory data will be erased when the batteries are removed
from the monitor.
1. Press the START button and keep the button depressed for approx. 3
seconds until the "n01" mark appears on the display.
2. Stop depressing the button.
3. All the data shall be displayed automatically. (Newest data will be
displayed first)
5