Using The Monitor; Installing / Changing The Batteries; Connecting The Air Hose; Connecting The Ac Adapter - A&D Medical Life Source UA-767FAM Manuel D'instructions

Installing / Changing the Batteries

1. Remove the battery cover.
2. Remove the used batteries and
insert new batteries into the battery
compartment as shown, taking
care that the polarities (+ and -) are
correct.
Use only R6P, LR6 or AA batteries.
3. Attach the battery cover.
CAUTION
Insert the batteries as shown in the battery compartment. If installed
incorrectly, the device will not work.
When
(LOW BATTERY mark)
with new ones. Do not mix old and new batteries. It may shorten the battery
life, or cause the device to malfunction.
Replace the batteries two seconds or more after the device turns off.
If
(LOW BATTERY mark)
a blood pressure measurement. The device may then recognize the new batteries.
(LOW BATTERY mark)
The battery life varies with the ambient temperature and may be shorter at
low temperatures.
Use the specified batteries only.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Four new AA alkaline batteries will last
approximately one year when used twice
for measurement each day.

Connecting the Air Hose

Insert the air connector plug into
the air socket firmly.

Connecting the AC Adapter

Insert the AC adapter plug into the
DC jack. Next, connect the AC adapter to an
electrical outlet. Use the specified AC adapter.
Note: When you unplug the AC adapter from the electrical outlet, please
grasp and pull the AC adapter body. When you remove the AC adapter
plug from the blood pressure monitor, please grasp and pull the adapter
plug. Doing otherwise may cause a fire, electric shock or malfunction.

Using the Monitor

blinks on the display, replace all batteries
appears even after the batteries are replaced, make
does not appear when the batteries are drained.
English 9
Step 1
Step 3
Step 2
Air Socket
r socket
Air Connector Plug
Step 1
DC Jack
AC Adapter Plug