Publicité
Les langues disponibles
Les langues disponibles
Manufacturer:
Scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Str. 69
D-89335 Ichenhausen
Valued customer,
We hope that you enjoy your new machine and wish you
every success in working with it.
Warning:
The manufacturer of these devices is not liable, under the
applicable Product Liability Act, for damages to this device
or by this device resulting from:
• improper handling,
• noncompliance with the operating instructions,
• repairs by a third, non-authorized party
• installation and replacement of non-original spare
parts,
• utilization, noncompliant with the regulations,
• failure of the electric equipment resulting from violation
of the electric specifications and VDE (Association of
Electrotechnology) regulations 0100, DIN 57113 / VDE
0113.
We advise you:
Before assembly and implementation, please read the op-
erating instructions in their entirety.
These operating instructions should make it easier for you
to get acquainted with your machine and to use it as in-
tended.
The operating instructions contain important indications
that will help you work professionally and efficiently with
the machine, at the same time avoiding risks, saving on re-
pair costs, decreasing downtime and increasing reliability
and lifespan of the machine.
In addition to the safety regulations provided in the operat-
ing instructions, you must observe the applicable regula-
tions of your country for the use of this machine.
You should keep the operating instructions near the ma-
chine. They are protected from dirt and moisture by a plas-
tic covering. These must be read and followed diligently
by any operator, before staring the work. Only those, who
have been instructed on the use and informed of all the
associated risks, should work on the machine. Minimum
age requirements should be observed.
General Considerations
• After unpacking, please check all of the parts for any
possible damages in transit. The feeder must be imme-
diately notified of any complaints. Late claims will not
be accepted.
• Check that the shipment is complete.
• Before use, familiarize yourself with the operating in-
structions.
• Please use only original parts as supplies, such as wear
and tear and replacement parts. You can obtain replace-
ment parts from your specialized dealer.
• When ordering, please give our item number, as well as
the type and the year of manufacture of the device.
10 english
Plana 3.0c and Plana 4.0c
Scope of delivery
Thicknesser-Planer Plana 3.0c
Assembly supplies (supply bag)
Caractéristiques
Plana 3.0c
techniques
Dimensions L x W x
1085x610x950
H mm
Table height mm
1085x255
Planer table L x l mm
Thicknessing table L x
600x248
l mm
Weight kg
Planer schaft
Planer schaft ø mm
Knife range ø mm
Speed max. 1/min
Number of blades
Type of Knives
Feeder
Number of feed
cylinders
Feeder cylinder ø mm
Lenght mm
Feeding speed m/min
Detachable
Motor
230/50
Motor V/Hz
Receiving capacity
2000
P1 W
Delivering capacity
1500
P2 W
2800
Speed 1/min
S1
Operating mode
Work data
Planer work width max.
mm
Chip work planer max.
mm en dégau
Thicknesser work
planer max. mm
Chip work thicknesser
max. mm
Aperture thickness
min/max. mm
90–45°
Stopper angle
Stopper lenght mm
Stopper height mm
Subject to technical changes!
Sound characteristics
In accordance with EN 23746 for sound power level, as
well as EN 31202 (correction factor k3 calculated ac-
cording to Appendix A.2 of EN 31204) for the calculation
of the sound pressure level at the workstation, the sound
and Plana 4.0c
Plane shaft guard
Combined extraction outlet
Adjustable planer fence
Operating instructions
Plana 4.0c
1610x700x950
805
825
1610x320
750x308
147
345
75
95
77
99
4000
4000
3
4
HSS planing knives
2
2
32
42
365
460
8
8
Oui
Oui
400/50
230/50
400/50
2200
2200
2200
1700
1700
1700
2800
2800
2800
S1
S1
S1
250
310
5
5
247
306
2
5
5/180
8/220
90-45°
700
1100
130
130
Publicité
