JVC DLA-F110 Manuel D'instructions page 17

Controls and features (continued)
■ Remote Control
To turn off the power
To set the screen size
(Reference page: 32)
Anamorphic
To control lens
(Reference page: 30)
To hide the image
temporarily(Reference
page: 34)
To display/close the menu
(Reference page: 41)
To adjust color temperature
To set gamma
How to insert batteries into the remote control
①
● If the remote control has to be brought closer to the projector to operate, it means that the batteries are
wearing out.
When this happens, replace the batteries. Insert the batteries according to the
● Be sure to insert the
● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the
batteries again and operate the remote control.
This manual downloaded from http://www.manualowl.com
STAND BY
COMPONENT
HDMI 1 HDMI 2
ASPECT
ANAMO
LENS.
C.M.D
CONTROL
HIDE
MENU
PICTURE MODE
NATURAL DYNAMIC
USER1 USER2
USER4 USER5
COLOR LENS.
GAMMA
TEMP
AP
②
end first.
ON
To turn on the power
To select input mode
COMP .
(Reference page: 30)
PC
Clear Motion Drive
Auto Alignment
AUTO
ALIGNMENT
(Reference page: 49)
To illuminate buttons on the remote
LIGHT
control for 7 second
To select or confirm
To return to the previous menu
BACK
(Reference page: 41)
3D
To switch picture mode
USER3
USER6
Lens Aperture
PIC.
ADJ.
Sequentially switched picture
adjust items, such as contrast and
brightness.The switching items are
not the same for different models, or
different picture modes.
③
ENGLISH
marks.
17