Bras B-frozen 6/1 Smart Carnet D'instructions page 20

B - f r o z e n 6 & 1 0 s m a r t
the recover. (see figure 17)(see figure 18).
figure 17
figure 18
7. 3. 6 ASSEMBLY
1 Slide the drip tray into place..
2 Lubricate the tap piston, the hexagonal joint and the mixer
at the points indicated in figure 19 (B-Frozen 6) or figure 20 (B-
Frozen 10), using only the grease that came with the machine
or other grease for use with food.
3 Reassemble the tap on the container in reverse order
compared to that shown in figure 19 and figure 20.
4 Replace the container gasket.
N.B. the rim with the greater diameter must be rested on the
rear wall (see figure 21).
5 Reassemble the hexagonal joint and then the mixer (see
figure 22).
20
figure 19
figure 20
figure 21
figure 22