SL Analytics HandyLab 780 Mode D'emploi page 79

Memosens input, oxygen
pH-calibration
*)
Operating modes
AutoCal buffer sets *)
Permissible calibration
range
Calibration timer *)
*) User-defi ned
1) Ranges depending on Memosens sensor
2) According to EN 60746-1, at nominal operating conditions
3) ± 1 count
4) Plus sensor error
M8 socket, 4 pins, for Memosens lab cable
Display ranges 1)
Temperature meas. range
Sensor standardization:
AutoCal
MANUAL
DATA INPUT
-01-
NIST standard
(Default)
-02- NIST technical
-03- SI Analytics technical
-04- Knick Calimat
-05- Mettler Toledo
-06- HACH
-07- Ciba (94)
-08- Hamilton
-09- Reagecon
-10- DIN 19267
via HandyLab Pilot (User)
-U1-
Zero point
With ISFET:
Slope
Interval 1 ... 99 days, can be switched off
Specifi cations
Saturation 0.000 ... 200.0 %
Concentration 000 μg/l ... 20.00 mg/l
Partial pressure 0.0 ... 1000 mbars
1)
-20 ... 150 °C
Automatic calibration in air, humidity adjustable,
Zero calibration
Calibration with automatic buffer recognition
Manual calibration with entry of individual buffer values
Data entry of zero and slope
1.679/4.006/6.865/9.180
1.68/4.00/7.00/10.01/12.46
2.00/4.00/7.00/10.00
2.00/4.00/7.00/9.00/12.00
2.00/4.01/7.00/9.21
4.01/7.00/10.01/12.00
2.06/4.00/7.00/10.00
2.00/4.01/7.00/10.01/12.00
2.00/4.00/7.00/9.00/12.00
1.09/4.65/6.79/9.23/12.75
pH 6 ... 8
–750 ... +750 mV Operating point (asymmetry)
approx. 74 ... 104 %
79