Configuration - SL Analytics HandyLab 780 Mode D'emploi

Confi guration
pH
pH Confi guration
1) In measuring mode, press the Menu softkey.
2) Select "Confi guration" and confi rm by pressing enter.
3) Make the desired adjustments.
The following table gives you an overview.
Factory settings are shown in bold print.
"Confi guration" menu selection – part 1
Language
Auto-off
Temperature
+ pH sensor
Wear
+ Calibration
Calibration timer
Interval
Calibration mode
Calibration points
Buffer set
MemoLog
TAG
*) "+" indicates that submenus can be opened by pressing enter.
**) Parameter can be confi gured using HandyLab Pilot software.
54
*)
*)
Deutsch | English | Español | Italiano | Français | Portu-
guês
Off | 5 min | 10 min | 30 min | 60 min
°C | °F
On | Off
Off | On
On: 00 ... 99 days
AutoCal | Manual | Data entry
Auto | 1-point | 2-point | 3-point
-01-
(De- NIST standard
Mettler-Toledo
fault)
Knick CaliMat
Ciba
-02- NIST technical
NIST technical
SI Analytics
-03-
NIST standard
technical
Hach
-04- Knick Calimat
WTW
-05- Hamilton Mettler Toledo
Reagecon
-06- HACH
DIN 19267
-07- Ciba (94)
**)
User buffer 1
-08- Hamilton
-09- Reagecon
-10- DIN 19267
**)
User-Puffer 1
Off | On
Off | On
1,679/4,006/6,865/9,180
1,68/4,00/7,00/10,01/12,46
.00/4.01/7.00/9.21
2.00/4.00/7.00/9.00/12.00
2,00/4,00/7,00/10,00
2.06/4.00/7.00/10.00
2,00/4,00/7,00/9,00/12,00
1.68/4.00/7.00/10.01/12.46
1.679/4.006/6.865/9.180 2,00/4,01/7,00/9,21
4.01/7.00/10.01/12.00
4,01/7,00/10,01/12,00
2.00/4.01/7.00/10.00
2,06/4,00/7,00/10,00
2.00/4.01/7.00/10.01/12.00
2,00/4,01/7,00/10,01/12,00
2.00/4.00/7.00/9.00/12.00
2,00/4,00/7,00/9,00/12,00
1.09/4.65/6.79/9.23/12.75
1,09/4,65/6,79/9,23/12,75