SL Analytics HandyLab 780 Mode D'emploi page 50

Information
pH Oxy Cond
1) In measuring mode, press the Menu softkey.
2) Select "Information" and confi rm by pressing enter.
3) Select the desired submenu and confi rm by pressing enter.
The different submenus are described below.
Calibration Record
Shows the data of the last calibration performed on the currently connected
sensor.
Sensor Information (Digital Sensors only)
Shows the data of the currently connected digital sensor. You can save sensor
data (MemoLog) in the device by pressing the "Save" softkey. The following
table shows the sensor information depending on the respective sensor
type:
Manufacturer
Order no.
Sensor serial no.
Cap serial no.
SW version
HW version
)
Calibration*
Zero point
Slope
Sensor operating
time
Cap operating time
Wear
SIP
CIP
Cell constant
Operating point
ORP correction
*) Last calibration
50
pH Cond Oxy ISFET ORP Optical
Oxy